Re: FIA GT 2000 - 2009 collection mod [new version of Exige 300RR released]

**gonzo-cool** 13/9/2018, 12:01

That's not too bad, i've seen much worser models from SCGT.
It's better than nothing.... With some updates it could be good.

**drr6** 13/9/2018, 13:15

#44 Team Lark McLaren - Keiichi Tsuchiya (J)/Masanori Sekiya (J)/Akihiko Nakaya (J)
[You must be registered and logged in to see this image.]

*This car is just a little modification from original one by WSGT.

**alexmezza** 13/9/2018, 14:12

Looks really good... thumbs

Don't you think this livery color is more pink than red ?
[You must be registered and logged in to see this image.]

**drr6** 13/9/2018, 14:38

alexmezza wrote:Looks really good...

Don't you think this livery color is more pink than red ?
[You must be registered and logged in to see this image.]

You are right Alex, but I've only made some changes on logos and numberplates. I will paint the whole car again and it will be a base for Parabolica car. Wink

**Update:
[You must be registered and logged in to see this image.]

I hope it had the right color now Wink

.

**JERACERX** 13/9/2018, 17:51

alexmezza wrote:
Cheeveer wrote:[You must be registered and logged in to see this link.]

Not to go off-topic or anytthing, but that Vector M12...!

Very low poly model, no cockpit, missing parts... totally outdated !!!
[You must be registered and logged in to see this image.]

If there's also no cockpit for the Mustang what should we do? Because the one from FIA 97 is in bad need of some better texture:
[You must be registered and logged in to see this image.]

**ChaosZero** 13/9/2018, 17:59

To make up for lack of cockpits, the next best thing is to go with something that fits the period.

The Vector was essentially a clone of the Lamborghini of the time, using the Diablo interior already in the mod is good enough.
The Mustang could be trickier, but the best solution is to go either with an interior from the Doran JE4 that is available somewhere around here or the one from the Mustang Trans-Am that is in FM7 which has been converted and wip over at TH and roughly fits the time period.

At that point, you might aswell do the BMW aswell and use one of the multitudes of E36 cockpits already around and you have the full set of GT2s.

**alexmezza** 13/9/2018, 20:38

M12 interior :
[You must be registered and logged in to see this image.]

**Maxellero** 13/9/2018, 21:14

Sylphide wrote:I hate this dumb car....slowly chipping away section by section. Im pretty sure this car has a asymmetrical livery but I only have photos of one side so its a symmetrical livery now lol
[You must be registered and logged in to see this link.]

Man, that's a tricky livery Very Happy

On my end - splitter and rear wing are now remapped so I think whole car is now paintable (where it needs to be, of course :V). It took much more time than I expected. Now I'll move on to make a cockpit.
[You must be registered and logged in to see this image.]

BTW - do you know where I can find those wheels in good quality?
[You must be registered and logged in to see this image.]

**Sylphide** 14/9/2018, 00:11

As im sure you already know atleast in 1998 they used the GMT rims with their GTR until halfway through the 98 season when they actually switched to the CLK LM.

**Maxellero** 14/9/2018, 18:36

Yeah I know, but in 1997 they used these wheels.
BTW I just checked cars list for all 3 missing seasons and we can aim for over 95% of completion for 1997 and 1998, and over 90% completion for 1999 (if we find someone who can make Diablo SV-R changes to standard SV model).

**Cheeveer** 14/9/2018, 22:23

What about the Bitters? They've been done on the WSGT Elise GT1's before, and I ported them to F302's Elise GT1 for my own amusement. But that is still quite far off (or good enough?).

**intelpower** 14/9/2018, 22:30

they are probably not worth the effort ,

how many races did they actually start ?

**Markano97** 14/9/2018, 22:37

Personally i like the way they look but unless a lot of effort is required to have them in-game i wouldn't mind seeing them! Very Happy

**JERACERX** 14/9/2018, 22:39

Yeah, the Bitters would be a lot of effort, I only did the Morgan because it was simple

**Maxellero** 14/9/2018, 22:50

They're not worth an effort, they only entered 2 rounds, both cars DNF on Silverstone and DNS (not even did a time in qualifying) on Hockenheim.

**Markano97** 14/9/2018, 22:52

Then no doubt they aren't worth the effort!! Its not like the grid is small either way. Razz

**Sylphide** 15/9/2018, 02:01

When you get the GTR finished lukasz can you send me the body .gmts so I can make a new template.

**drr6** 15/9/2018, 11:29

#27 Parabolica Motorsport - Chris Goodwin (GB)/Gary Ayles (GB)
[You must be registered and logged in to see this image.]

About the CLK wheels, why not use the S7-R wheels (Konrad Style)?

**alexmezza** 15/9/2018, 12:58

Maxellero wrote:BTW - do you know where I can find those wheels in good quality?
[You must be registered and logged in to see this image.]

Those ones ?
[You must be registered and logged in to see this image.]

**Maxellero** 15/9/2018, 13:22

Cockpit WIP, only thing I can't get working is the display, does anyone know a good tutorial for this?
[You must be registered and logged in to see this image.]

Sylphide wrote:When you get the GTR finished lukasz can you send me the body .gmts so I can make a new template.

Yeah, for sure Very Happy

alexmezza wrote:
Maxellero wrote:BTW - do you know where I can find those wheels in good quality?
[You must be registered and logged in to see this link.]
Those ones ?
[You must be registered and logged in to see this link.]

Yep, I think that's the exact same ones.

**kk08** 15/9/2018, 14:16

[You must be registered and logged in to see this link.]

alexmezza wrote:
Those ones ?
[You must be registered and logged in to see this image.]

Have you painted this car? Why don't share it?

[You must be registered and logged in to see this link.]
The quick way could be a copy of CLK LM motec, but if you need to make it from scratch this my bible:
(this is a post made be Patr10t with some enhacement). Always check material settings in standard cars because I could have written something wrong.

LEDSL = Overheating/Temperature Warning.
LEDPSR = Pit Stop Requested (Pending).
LEDPSY = Pit Stop Accepted (Yes/Go for pit stop).
LEDLF = Low Fuel
LEDRL = Active Speed Limiter

LEDFR = Black Flag
LEDFY = Yellow Flag
LEDFB = Blue Flag

rpmlight1...N = RPM Light
rpmbar1...N = RPM Bar

---------------------------------------------------------
Settings in 3dSimed
RenderTarget, Emissive RGB (WHITE), Specular RGB (WHITE)
---------------------------------------------------------
Every material except mirror must have animation type "Event" and sequence "0,1". You have to add two files named YOUR_MATERIAL_NAME+00 and YOUR_MATERIAL_NAME+01 that represent the light off or on.

mirror (MIRROR.BMP)

motecnl (MOTECNL.TGA[OFF],MOTECL.TGA[ON])
+ FNTCMOTL.BMP
+ FNTCMOTM.BMP
+ FNTCMOTS.BMP

motecnl2 (MOTECNL2.TGA[OFF],MOTECL2.TGA[ON]) This is a second motec.
+ FNTCMOTL2.BMP
+ FNTCMOTM2.BMP
+ FNTCMOTS2.BMP

You can make a third motec but I have never seen more than 3 motecs.

**Maxellero** 15/9/2018, 16:34

The thing is, I copied the one from CLK LM but still can't make it working. I ran out of ideas what's wrong scratch

**alexmezza** 15/9/2018, 17:04

kk08 wrote:[You must be registered and logged in to see this link.]

Have you painted this car ?

Nope...

**Maxellero** 15/9/2018, 20:40

Lights are done Very Happy

Only some work with materials left (and this goddamn display) and car will be done.
[You must be registered and logged in to see this image.]

**Cheeveer** 15/9/2018, 20:51

Excellent! Such an important car for this era.

Sponsored content

Mon	Tue	Wed	Thu	Fri	Sat	Sun
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

What version of Exige do you want?