European Endurance Center
Would you like to react to this message? Create an account in a few clicks or log in to continue.

EEC GT3 Base v2.2 - Updated January 16 , 2018

Page 8 of 24 Previous  1 ... 5 ... 7, 8, 9 ... 16 ... 24  Next

Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Kalinin on Mon 22 Aug 2016, 11:24

@Bob Cech wrote:I wanted to drive Z4 again but I found out that Z4 and Ginetta had 20kg put on. Whats the reason? So you slowed down Z4 and Ginetta
and other cars got faster. I think each car got some advantage in some respect. If Z4 and Ginetta was faster in SCE, I didnt see people rushing to drive that cars.  I tnink Z4 should be the same in AMS.
Got plenty of reports about the Z4 and Ginneta being very fast so I added 20kg, was very small BoP juist to see what happens, seems fine now

______________________________________________________________________________________________________________________
Will Mazeo
The only way to God is called Jesus, not religion, just Jesus.
Kalinin
Kalinin
EEC Team

Posts : 10314
Join date : 2012-05-16
Age : 33
Location : Brazil

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Mon 22 Aug 2016, 11:30

i think the problem of both was not the laptime, more the toppsped compared to the others and i dont think they are "slower" now... just slower on the laptimes...

uli boped the viper with -20kg because it had some problems on corners... Wink

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Kalinin on Mon 22 Aug 2016, 11:47

Want to limit it on gears instead? Going to need some time to do so, and will have to be done on all cars then

______________________________________________________________________________________________________________________
Will Mazeo
The only way to God is called Jesus, not religion, just Jesus.
Kalinin
Kalinin
EEC Team

Posts : 10314
Join date : 2012-05-16
Age : 33
Location : Brazil

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Scorpyo on Tue 23 Aug 2016, 05:17

Daniel, can you send me just Nissan GT3?

BTW: Nice move to deactivating PMs... Evil or Very Mad

______________________________________________________________________________________________________________________
Marijo Pecigus EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Croati11 EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Zagreb11
Scorpyo
Scorpyo

Posts : 787
Join date : 2012-05-04

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Tue 23 Aug 2016, 08:23

you know it Razz and you know you can write in skype Razz

want just the loose files?

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Scorpyo on Tue 23 Aug 2016, 08:37

@PATR10T wrote:you know it Razz and you know you can write in skype Razz

want just the loose files?

Yes, that should be just fine. Thanks

______________________________________________________________________________________________________________________
Marijo Pecigus EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Croati11 EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Zagreb11
Scorpyo
Scorpyo

Posts : 787
Join date : 2012-05-04

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Tue 23 Aug 2016, 09:15

check your pm Wink

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Scorpyo on Tue 23 Aug 2016, 09:21

@PATR10T wrote:check your pm Wink

Thanks

______________________________________________________________________________________________________________________
Marijo Pecigus EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Croati11 EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Zagreb11
Scorpyo
Scorpyo

Posts : 787
Join date : 2012-05-04

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Tue 23 Aug 2016, 09:27

templates you can download from the first post Wink

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Scorpyo on Tue 23 Aug 2016, 09:46

@PATR10T wrote:templates you can download from the first post Wink

Thanks but I don't need them.

______________________________________________________________________________________________________________________
Marijo Pecigus EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Croati11 EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Zagreb11
Scorpyo
Scorpyo

Posts : 787
Join date : 2012-05-04

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  SilverSun on Tue 23 Aug 2016, 10:08

...hum, what are you doing with those files? scratch

______________________________________________________________________________________________________________________
This forum is a fucking shit.

SilverSun

Posts : 433
Join date : 2012-05-21

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Tue 23 Aug 2016, 10:17

he needs some files for his ac convert... Razz

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  CrivitzChris on Tue 23 Aug 2016, 13:22

This should go with both the offline and for the GTS league, but what are the difference between the .gen files for the cars. I'm assuming it the difference between all the lights but is there a "genstring help" for the .gen files? Usually I'd load up all the files in 3dsimed so I can quickly go through all of them but with the files locked, that isn't possible.

______________________________________________________________________________________________________________________
Chris Lesperance - CrivitzChris

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 76561197996714205

CrivitzChris

Posts : 1080
Join date : 2012-07-25
Age : 36
Location : Green Bay WI USA

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Tue 23 Aug 2016, 15:21

the lights work together other parts of the car like the different bumpers with hole and without and with the endulights... on some cars also with the chassis etc

the explain is on each genstring explain file the lights part Wink

this system avoids that you have to change 3 digits on the genstring to add endulights and you dont have lightglow on a bumper where no endulights...

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  CrivitzChris on Tue 23 Aug 2016, 16:16

@PATR10T wrote:the explain is on each genstring explain file the lights part Wink

That's the part I'm not seeing... I'll have to take another look once I get home Shocked .


EDIT: I'm an idiot. I found it.

______________________________________________________________________________________________________________________
Chris Lesperance - CrivitzChris

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 76561197996714205

CrivitzChris

Posts : 1080
Join date : 2012-07-25
Age : 36
Location : Green Bay WI USA

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Maxellero on Wed 24 Aug 2016, 17:55

Windscreen banners report!
I checked all cars and banner from cockpit view don't work in BMW Z4 2010, Ginetta and Camaro, also in all Fords (also in GT1-based Lambda) It shows only small stripe on the bottom
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 201608241_ahhxsnn

______________________________________________________________________________________________________________________
Lukasz Pala EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Bezaty10
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 1tomcoc6iogl203zg
Maxellero
Maxellero
EEC Team

Posts : 1841
Join date : 2013-09-16
Age : 25
Location : Poland

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Wed 24 Aug 2016, 18:21

dont worry on the fords theres just that small stripe... dont know if this is real and the ford has something inside or sms made a modeling fail... as it looks like the cockpit dosnt really fit the car from the outside and some parts are very strange...

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Maxellero on Wed 24 Aug 2016, 18:41

Oh, ok.
Just searched for some videos. On this one you can see that banner is more visible but still not the whole one.

______________________________________________________________________________________________________________________
Lukasz Pala EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Bezaty10
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 1tomcoc6iogl203zg
Maxellero
Maxellero
EEC Team

Posts : 1841
Join date : 2013-09-16
Age : 25
Location : Poland

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Wed 24 Aug 2016, 19:00

on the gte corvette for example its impossible to add like i did it because there it is like a huge box -.-

i dont wanted a huge amount of work and also something where the painters dont had to make an extra file, like on the original cars from shift2 you have a extra texture for the inside banners and nearly no painter really painted them... -.-

but the cars you wrote i will check Wink

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  rocafella1978 on Thu 25 Aug 2016, 06:09

have you guys/ or anyone checked with V.1.0 of AMS? today i started up and game just crash back to desktop, geht ueberhaupt nichts, as soon as delete EEC GT3 (my only mod) it starts up with splash screen and back into game...??? wtf? anyone having similar problems?
thanks guys, would be really annoying if EEC GT3 now does not work! love these cars!
rocafella1978
rocafella1978

Posts : 11
Join date : 2016-08-21
Age : 42

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  PATR10T on Thu 25 Aug 2016, 06:44

just can write about the beta v1.0 but there it works fine Wink dont tested the normal game as i started the donwload a minute ago...

______________________________________________________________________________________________________________________
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 V1
EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Unbena12 Daniel Ludwig
PATR10T
PATR10T
EEC Team

Posts : 9024
Join date : 2012-05-14
Age : 40
Location : Germany

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  RS fordy on Thu 25 Aug 2016, 12:28

working fine here with all mods no problems

______________________________________________________________________________________________________________________
Darran Forde       drive
RS fordy
RS fordy

Posts : 145
Join date : 2016-07-29
Age : 42
Location : u.k

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Kalinin on Thu 25 Aug 2016, 12:41

@rocafella1978 wrote:have you guys/ or anyone checked with V.1.0 of AMS? today i started up and game just crash back to desktop, geht ueberhaupt nichts, as soon as delete EEC GT3 (my only mod) it starts up with splash screen and back into game...??? wtf? anyone having similar problems?
thanks guys, would be really annoying if EEC GT3 now does not work! love these cars!
Did you try reinstalling it? I mean the full thing, the shared textures included. I noticed AMS is strange with that file, when I was updating the hdv to include AMS features the mod would start giving gmotor error after some changes so I had to put the shared textures back there from time to time

______________________________________________________________________________________________________________________
Will Mazeo
The only way to God is called Jesus, not religion, just Jesus.
Kalinin
Kalinin
EEC Team

Posts : 10314
Join date : 2012-05-16
Age : 33
Location : Brazil

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  JERACERX on Thu 25 Aug 2016, 13:31

This is a question i've always had, is the Porsche Cup Car supposed to be as fast as the GT3 cars or is it just a case of the car just sort of being there?
JERACERX
JERACERX

Posts : 280
Join date : 2015-11-28
Age : 21
Location : Maryland, USA

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Kalinin on Thu 25 Aug 2016, 14:00

Yeah, the car is "just there", kind of. Would be nice if it could use Boxer Cup physics

______________________________________________________________________________________________________________________
Will Mazeo
The only way to God is called Jesus, not religion, just Jesus.
Kalinin
Kalinin
EEC Team

Posts : 10314
Join date : 2012-05-16
Age : 33
Location : Brazil

Back to top Go down

EEC GT3 Base v2.2 - Updated January 16 , 2018 - Page 8 Empty Re: EEC GT3 Base v2.2 - Updated January 16 , 2018

Post  Sponsored content


Sponsored content


Back to top Go down

Page 8 of 24 Previous  1 ... 5 ... 7, 8, 9 ... 16 ... 24  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum