New topics
Most active topics
Most Viewed Topics
Konvertieren eines Fahrzeuges
+3
OscarF
courty89
rene9369
7 posters
Page 1 of 1
Konvertieren eines Fahrzeuges
Hallo,
würde nur zu gerne wissen wie man ein Fahrzeug von rFactor nach GTR2 konvertieren kann. Ich habe da nämlich bei rFactor eine Saab 93 Aero (Rallyeworld Gr.A7) gefunden den ich unbedingt für GTR2 haben will. Aber auch andere Fahrzeuge interessieren mich. Die ich für das 24h von Spa gebrauchen kann. Daher würde mich generell interessieren wie das geht. Was sollte ich zuerst machen ..... Welche Programme benötige ich ..... u.s.w.
Natürlich nur für mich
Bitte nur antworten wenn ihr mir helfen könnt oder wollt
würde nur zu gerne wissen wie man ein Fahrzeug von rFactor nach GTR2 konvertieren kann. Ich habe da nämlich bei rFactor eine Saab 93 Aero (Rallyeworld Gr.A7) gefunden den ich unbedingt für GTR2 haben will. Aber auch andere Fahrzeuge interessieren mich. Die ich für das 24h von Spa gebrauchen kann. Daher würde mich generell interessieren wie das geht. Was sollte ich zuerst machen ..... Welche Programme benötige ich ..... u.s.w.
Natürlich nur für mich
Bitte nur antworten wenn ihr mir helfen könnt oder wollt
rene9369- Posts : 39
Join date : 2015-11-03
Konvertieren eines Fahrzeuges
Hallo,
um zu zeigen wie sehr mir daran gelegen ist ein Fahrzeug zu konvertieren, habe ich mir die verschiedenen Dateien angesehen. Denn wer Hilfe von anderen erhofft, sollte auch bereit sein selber etwas zu tuen. So habe ich die Dateien verglichen und würde nun gerne wissen inwieweit das richtig ist.
Als Beispiel habe ich ebenfalls ein Saab Modell gefunden. Also hier zu dem was ich heraus gefunden habe:
Zunächst einmal ist mir aufgefallen das es bei GTR2 3 Dateien gibt die es bei rFactor nicht gibt (oder zumindest nicht an der Stelle). Es sind die 3 SIM_Dateien die GameData einsortiert werden
SIM_GM_Racing .gdb-Datei
SIM_GM_Racing .text-Datei
SIM_GM_Racing_ICON .tga_Datei
Wenn man ein Fahrzeug konvertieren will muss man wissen welche Datei welche ist. Einfach gesagt: " Was ist was ". Hier mein Ergebnis :
GTR2 rFactor
2008_Michelin_FWD .TYR-Datei A7_TIRE .TBC-Datei
(Reifen) A7_GRAVEL .TBC-Datei
Saab_93 .AUD-Datei
Saab_93 .CAS-Datei 93aero .gen-Datei
93aero_spinner .gen-Datei
Saab_93 .ENG-Datei A7_engine .ini-Datei
A7_engineT .ini-Datei
Saab_93 .GRB-Datei A7_Gears .ini-Datei
Saab_93 .HDC-Datei fisica93aero .hdv-Datei
Saab_93 .SP-Datei A7_SUSP .PM-Datei
Saab_93_damage .DMG-Datei Damage .ini-Datei
Saab_93_CPIT .GTR-Datei
Saab_93_Trackaholics .GTR-Datei
(Wheels ???)
A7_Upgrades .ini-Datei
A7_Upgrades+++ .ini-Datei
93aero_cam .CAM-Datei
93aero_cockpitinfo .ini-Datei
Hierbei muss erwähnt werden das alle Dateien die bei rFactor mit A7 anfangen nicht im Fahrzeugordner enthalten sind.
Sind meine Annahmen soweit richtig ???
Und wenn ja, wozu gehören die anderen ???
Ach ja, und warum wurde die .hdv-Datei fisica93aero genannt ??? Und nicht einfach nur 93aero ???
Bitte nur antowrten wenn jemand Ahnung hat
um zu zeigen wie sehr mir daran gelegen ist ein Fahrzeug zu konvertieren, habe ich mir die verschiedenen Dateien angesehen. Denn wer Hilfe von anderen erhofft, sollte auch bereit sein selber etwas zu tuen. So habe ich die Dateien verglichen und würde nun gerne wissen inwieweit das richtig ist.
Als Beispiel habe ich ebenfalls ein Saab Modell gefunden. Also hier zu dem was ich heraus gefunden habe:
Zunächst einmal ist mir aufgefallen das es bei GTR2 3 Dateien gibt die es bei rFactor nicht gibt (oder zumindest nicht an der Stelle). Es sind die 3 SIM_Dateien die GameData einsortiert werden
SIM_GM_Racing .gdb-Datei
SIM_GM_Racing .text-Datei
SIM_GM_Racing_ICON .tga_Datei
Wenn man ein Fahrzeug konvertieren will muss man wissen welche Datei welche ist. Einfach gesagt: " Was ist was ". Hier mein Ergebnis :
GTR2 rFactor
2008_Michelin_FWD .TYR-Datei A7_TIRE .TBC-Datei
(Reifen) A7_GRAVEL .TBC-Datei
Saab_93 .AUD-Datei
Saab_93 .CAS-Datei 93aero .gen-Datei
93aero_spinner .gen-Datei
Saab_93 .ENG-Datei A7_engine .ini-Datei
A7_engineT .ini-Datei
Saab_93 .GRB-Datei A7_Gears .ini-Datei
Saab_93 .HDC-Datei fisica93aero .hdv-Datei
Saab_93 .SP-Datei A7_SUSP .PM-Datei
Saab_93_damage .DMG-Datei Damage .ini-Datei
Saab_93_CPIT .GTR-Datei
Saab_93_Trackaholics .GTR-Datei
(Wheels ???)
A7_Upgrades .ini-Datei
A7_Upgrades+++ .ini-Datei
93aero_cam .CAM-Datei
93aero_cockpitinfo .ini-Datei
Hierbei muss erwähnt werden das alle Dateien die bei rFactor mit A7 anfangen nicht im Fahrzeugordner enthalten sind.
Sind meine Annahmen soweit richtig ???
Und wenn ja, wozu gehören die anderen ???
Ach ja, und warum wurde die .hdv-Datei fisica93aero genannt ??? Und nicht einfach nur 93aero ???
Bitte nur antowrten wenn jemand Ahnung hat
rene9369- Posts : 39
Join date : 2015-11-03
Re: Konvertieren eines Fahrzeuges
Kalinin wrote:The official language of the forum is english....
Has a point lol if English isn't a language you speak then may I advise using Google Translate? You small extra hardship will make life easier for a whole community and you may be more likey to get help
Konvertieren eines Fahrzeuges
@ Kalinin and Courty89
you are very funny. But my language isn´t english you see. And by the way, it is not so difficult to understand what i want to know. Or ???
I want to have help to convert the Saab 93 Aero from rFactor (GrA7 Rallyeworld 2013) to GTR2. But i understand not all.
you are very funny. But my language isn´t english you see. And by the way, it is not so difficult to understand what i want to know. Or ???
I want to have help to convert the Saab 93 Aero from rFactor (GrA7 Rallyeworld 2013) to GTR2. But i understand not all.
rene9369- Posts : 39
Join date : 2015-11-03
Re: Konvertieren eines Fahrzeuges
do you know this tutorial: [You must be registered and logged in to see this link.]
Guest- Guest
Re: Konvertieren eines Fahrzeuges
If it´s not so difficult you should use Google for a search! The net is full of tutorials of how to convert cars, tracks etc. And: This is an english speaking forum!
______________________________________________________________________________________________________________________
Oscar Eaff
OscarF- Posts : 93
Join date : 2016-05-16
Location : Germany
Re: Konvertieren eines Fahrzeuges
rene9369 wrote:@ Kalinin and Courty89
you are very funny. But my language isn´t english you see. And by the way, it is not so difficult to understand what i want to know. Or ???
I want to have help to convert the Saab 93 Aero from rFactor (GrA7 Rallyeworld 2013) to GTR2. But i understand not all.
this place in not German language forum, it international forum main language is this forum is English.
you should post in English, especially if you want help something
not every member can speak German.
______________________________________________________________________________________________________________________
Ouprakon Leeka (aka Haruo)
haruo- Posts : 190
Join date : 2014-06-10
Re: Konvertieren eines Fahrzeuges
haruo wrote:rene9369 wrote:@ Kalinin and Courty89
you are very funny. But my language isn´t english you see. And by the way, it is not so difficult to understand what i want to know. Or ???
I want to have help to convert the Saab 93 Aero from rFactor (GrA7 Rallyeworld 2013) to GTR2. But i understand not all.
this place in not German language forum, it international forum main language is this forum is English.
you should post in English, especially if you want help something
not every member can speak German.
Not to mention that he didn't have already presented.
______________________________________________________________________________________________________________________
Antonio José Ramos [You must be registered and logged in to see this image.]
Amateur car converter from gtr2 to rF
ajrf- Posts : 298
Join date : 2013-10-01
Age : 31
Location : Albacete, Spain
Re: Konvertieren eines Fahrzeuges
Presentation is not needed for the open part of the forum (like this one)
Guest- Guest
Konvertieren eines Fahrzeuges
Salut,
eu lucrez astazi asupra conversiunie (this is moldoviensca) ok ok just a hoax.
Today i have open the .mas-data from rFactor. And put them in the "TEMP-Folder". Now i must wait of the activation code from 3dsimED.
Next one: Zitat from ConvertCars rf2gtr2: ....loading these files as "objects" with 3DsimED, then saving these again as "GTR2-objects,....
What is "objects" ??? Is this the .gmt-data ??? And what about the .dds ??? Must i load/save this too ??? "GTR2-objects??? Is this the GTR2 "Saab93aero"_OBJ GTR-Datei (.gtr) ???
eu lucrez astazi asupra conversiunie (this is moldoviensca) ok ok just a hoax.
Today i have open the .mas-data from rFactor. And put them in the "TEMP-Folder". Now i must wait of the activation code from 3dsimED.
Next one: Zitat from ConvertCars rf2gtr2: ....loading these files as "objects" with 3DsimED, then saving these again as "GTR2-objects,....
What is "objects" ??? Is this the .gmt-data ??? And what about the .dds ??? Must i load/save this too ??? "GTR2-objects??? Is this the GTR2 "Saab93aero"_OBJ GTR-Datei (.gtr) ???
Last edited by rene9369 on 26/8/2017, 09:29; edited 1 time in total (Reason for editing : Corretur)
rene9369- Posts : 39
Join date : 2015-11-03
Re: Konvertieren eines Fahrzeuges
rene9369 wrote:Salut,
eu lucrez astazi asupra conversiunie (this is moldoviensca) ok ok just a hoax.
Today i have open the .mas-data from rFactor. And put them in the "TEMP-Folder". Now i must wait of the activation code from 3dsimED.
Zitat from ConvertCars rf2gtr2: ....loading these files as "objects" with 3DsimED, then saving these again as "GTR2-objects,....
What is "objects" ??? Is this the .gmt-data ??? And what about the .dds ??? Must i load/save this too ??? "GTR2-objects is this the GTR2 Saab93aero_OBJ GTR-Datei (.gtr) ???
about 3dsimed u'll had 20 free days
if u had opened a mas file in a folder u can load all rfactor gmt car parts at same time and export them as gtr2 gmt pattern... pretty easy!!!
import on 3dsimed as object
[You must be registered and logged in to see this image.]
Select all files
[You must be registered and logged in to see this image.]
Open and have u there
[You must be registered and logged in to see this image.]
Then cliq export as gtr2 and overwritten all files or not!!!
good luck!
______________________________________________________________________________________________________________________
Sérgio Carvalho
srcarvalho- Posts : 617
Join date : 2012-10-04
Age : 56
Location : Brazil
Re: Konvertieren eines Fahrzeuges
srcarvalho wrote:rene9369 wrote:Salut,
eu lucrez astazi asupra conversiunie (this is moldoviensca) ok ok just a hoax.
Today i have open the .mas-data from rFactor. And put them in the "TEMP-Folder". Now i must wait of the activation code from 3dsimED.
Zitat from ConvertCars rf2gtr2: ....loading these files as "objects" with 3DsimED, then saving these again as "GTR2-objects,....
What is "objects" ??? Is this the .gmt-data ??? And what about the .dds ??? Must i load/save this too ??? "GTR2-objects is this the GTR2 Saab93aero_OBJ GTR-Datei (.gtr) ???
about 3dsimed u'll had 20 free days
if u had opened a mas file in a folder u can load all rfactor gmt car parts at same time and export them as gtr2 gmt pattern... pretty easy!!!
import on 3dsimed as object
[You must be registered and logged in to see this image.]
Select all files
[You must be registered and logged in to see this image.]
Open and have u there
[You must be registered and logged in to see this image.]
Then cliq export as gtr2 and overwritten all files or not!!!
good luck!
Thanks ! But when you export you need to create 4 .gtr files as Cpit, Obj, tex and wheel, no ?
If I overwritte in one object, I have that
[You must be registered and logged in to see this image.]
What files you overwritte for doing tex.gtr ?
______________________________________________________________________________________________________________________
Lionel OCHE/FRA
Jarodparker- Posts : 257
Join date : 2015-08-16
Age : 38
Location : France
Re: Konvertieren eines Fahrzeuges
this should be 1st step in a conversion...
to create a stex gtr or other gtr file file u must use tools---> pack data option on 3dsimed or use geditor tool
tex for textures
obj for objects
cpit for cockpit, motec, steering wheel
wheels for tires
open a valid mod files to see what should be in...
to create a stex gtr or other gtr file file u must use tools---> pack data option on 3dsimed or use geditor tool
tex for textures
obj for objects
cpit for cockpit, motec, steering wheel
wheels for tires
open a valid mod files to see what should be in...
______________________________________________________________________________________________________________________
Sérgio Carvalho
srcarvalho- Posts : 617
Join date : 2012-10-04
Age : 56
Location : Brazil
Re: Konvertieren eines Fahrzeuges
ok thanks !
______________________________________________________________________________________________________________________
Lionel OCHE/FRA
Jarodparker- Posts : 257
Join date : 2015-08-16
Age : 38
Location : France
Konvertieren eines Fahrzeuges
Hello,
today i have create a 93aero_cpit, 93aero_obj, 93aero_tex and 93aero_wheels. Hope so. And all the other Dtat i have change too. So .cas, .eng, .grb, .hdc, .sp, .tyr-data. But i can not see the car in game. So i think i have a mistake. But who ???
Question: Is it ok to created the .gtr-data with the .gmt-data and the other i have convert in the TEMP-Folder And than changed in GTR2-,gnt ???Also the convert GTR2-.gmt data.
Ach ja, my 3DSimED3 not work. Tja, i have wait too long. But i have 3DSimED2. I hope it worlks same good.
today i have create a 93aero_cpit, 93aero_obj, 93aero_tex and 93aero_wheels. Hope so. And all the other Dtat i have change too. So .cas, .eng, .grb, .hdc, .sp, .tyr-data. But i can not see the car in game. So i think i have a mistake. But who ???
Question: Is it ok to created the .gtr-data with the .gmt-data and the other i have convert in the TEMP-Folder And than changed in GTR2-,gnt ???Also the convert GTR2-.gmt data.
Ach ja, my 3DSimED3 not work. Tja, i have wait too long. But i have 3DSimED2. I hope it worlks same good.
Last edited by rene9369 on 26/8/2017, 20:47; edited 1 time in total (Reason for editing : Corretur)
rene9369- Posts : 39
Join date : 2015-11-03
Re: Konvertieren eines Fahrzeuges
rene9369 wrote:Hello,
today i have create a 93aero_cpit, 93aero_obj, 93aero_tex and 93aero_wheels. Hope so. And all the other Dtat i have change too. So .cas, .eng, .grb, .hdc, .sp, .tyr-data. But i can not see the car in game. So i think i have a mistake. But who ???
Question: Is it ok to created the .gtr-data with the .gmt-data and the other i have convert in the TEMP-Folder And than changed in GTR2-,gnt ???Also the convert GTR2-.gmt data.
Ach ja, my 3DSimED3 not work. Tja, i have wait too long. But i have 3DSimED2. I hope it worlks same good.
Have you tried setting up a trace so when something doesn't load or the games crashes you can see what was missing?
Re: Konvertieren eines Fahrzeuges
Well there's a lot of steps, those are wc materials for body, windows, glass, etc
where 'd see it while converting RF to GTR2
WCCARBODY (main body car) = WC_TEAM_BODY1_PA
WCWINDOW (windows) = WC_TEAM_WINDOWS_GL
WCWING (rear wing or others parts) = it can be part of WC_TEAM_BODY1_PA or add a wildcard material name like WC_CPIT_01a (if u had different parts body
- WC Materials:
- GTR2 WC materiais
wcrefueler
wclollipop
wcpithelmet
wcpitbody
WC_CPIT_03e
WC_CPIT_03d
WC_CPIT_03c
WC_CPIT_03b
WC_CPIT_03a
WC_CPIT_02e
WC_CPIT_02d
WC_CPIT_02c
WC_CPIT_02b
WC_CPIT_02a
WC_CPIT_0
WC_CPIT_01c
WC_CPIT_01b
WC_CPIT_01a
WC_HELMET_A
WC_HELMET
WC_DRIVER_ARMS
WC_DRIVER_BODY
WC_TEAM_BODY_MIP
WC_TEAM_BODY_LOD
WC_TEAM_WINDOWS_CA_A8
WC_TEAM_WINDOWS_CR_A8
WC_TEAM_WINDOWS_GL_A8
WC_TEAM_WINDOWS_AL_A8
WC_TEAM_WINDOWS_PL_A8
WC_TEAM_WINDOWS_FL_A8
WC_TEAM_WINDOWS_PA_A8
WC_TEAM_WINDOWS_CA
WC_TEAM_WINDOWS_CR
WC_TEAM_WINDOWS_GL
WC_TEAM_WINDOWS_AL
WC_TEAM_WINDOWS_PL
WC_TEAM_WINDOWS_FL
WC_TEAM_WINDOWS_PA
WC_TEAM_BODY2_CA_A8
WC_TEAM_BODY2_CR_A8
WC_TEAM_BODY2_GL_A8
WC_TEAM_BODY2_AL_A8
WC_TEAM_BODY2_PL_A8
WC_TEAM_BODY2_FL_A8
WC_TEAM_BODY2_PA_A8
WC_TEAM_BODY2_CA_A1
WC_TEAM_BODY2_CR_A1
WC_TEAM_BODY2_GL_A1
WC_TEAM_BODY2_AL_A1
WC_TEAM_BODY2_PL_A1
WC_TEAM_BODY2_FL_A1
WC_TEAM_BODY2_PA_A1
WC_TEAM_BODY2_CA
WC_TEAM_BODY2_CR
WC_TEAM_BODY2_GL
WC_TEAM_BODY2_AL
WC_TEAM_BODY2_PL
WC_TEAM_BODY2_FL
WC_TEAM_BODY2_PA
WC_TEAM_BODY1_CA_A8
WC_TEAM_BODY1_CR_A8
WC_TEAM_BODY1_GL_A8
WC_TEAM_BODY1_AL_A8
WC_TEAM_BODY1_PL_A8
WC_TEAM_BODY1_FL_A8
WC_TEAM_BODY1_PA_A8
WC_TEAM_BODY1_CA_A1
WC_TEAM_BODY1_CR_A1
WC_TEAM_BODY1_GL_A1
WC_TEAM_BODY1_AL_A1
WC_TEAM_BODY1_PL_A1
WC_TEAM_BODY1_FL_A1
WC_TEAM_BODY1_PA_A1
WC_TEAM_BODY1_CA
WC_TEAM_BODY1_CR
WC_TEAM_BODY1_GL
WC_TEAM_BODY1_AL
WC_TEAM_BODY1_PL
WC_TEAM_BODY1_FL
WC_TEAM_BODY1_PA
GL = glass
PL = plastic
AL = aluminum
FL = fiberglass or flat
CR = chrome
CA = carbon
PA = paint
A1 = DXT1 - one bit explicit alpinestarsha
A8 = DXT5 - eight bit interpolated alpinestarsha
In GTR2 the detachable hood has to be set as Instance=DEBRIS5 or you won't see it in hood or cockpit view.
For working lights Debris 0 to 4
MOTEC
LEDSL = Overheating/Temperature Warning.
LEDPSR = Pit Stop Requested (Pending).
LEDPSY = Pit Stop Accepted (Yes/Go for pit stop).
LEDLF = Low Fuel
LEDRL = Speed Limiter
LEDFR = Black Flag
LEDFY = Yellow Flag
LEDFB = Blue Flag
where 'd see it while converting RF to GTR2
WCCARBODY (main body car) = WC_TEAM_BODY1_PA
WCWINDOW (windows) = WC_TEAM_WINDOWS_GL
WCWING (rear wing or others parts) = it can be part of WC_TEAM_BODY1_PA or add a wildcard material name like WC_CPIT_01a (if u had different parts body
Last edited by srcarvalho on 30/8/2017, 02:17; edited 1 time in total
______________________________________________________________________________________________________________________
Sérgio Carvalho
srcarvalho- Posts : 617
Join date : 2012-10-04
Age : 56
Location : Brazil
Re: Konvertieren eines Fahrzeuges
and make sure your cas file name is the same on car file too
______________________________________________________________________________________________________________________
Sérgio Carvalho
srcarvalho- Posts : 617
Join date : 2012-10-04
Age : 56
Location : Brazil
Konvertieren eines Fahrzeuges
Hello,
can anyone tell where i can find the Corrado.sfx sound-data. I need it for my Saab 93aero. To convert to GTR2 .aud sound-data
ok, ok i have found it in the base mod
can anyone tell where i can find the Corrado.sfx sound-data. I need it for my Saab 93aero. To convert to GTR2 .aud sound-data
ok, ok i have found it in the base mod
Last edited by rene9369 on 3/9/2017, 12:51; edited 1 time in total (Reason for editing : Corretur)
rene9369- Posts : 39
Join date : 2015-11-03
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Yesterday at 22:53 by sandersk
» Looking for NASCAR skins?
Yesterday at 17:03 by why_not_simracer
» Help needed FRM TOURING CARS
24/3/2024, 15:42 by fjs
» La Dehesa Conversion from rFactor for GTR2
24/3/2024, 04:11 by hundo
» introduce
22/3/2024, 12:04 by teufteuf72
» Hello from Japan
21/3/2024, 09:12 by GRtoyotafan2
» Greetings from Bulgaria
18/3/2024, 21:33 by al27
» Greetings from Argentina
17/3/2024, 16:14 by VamosTorino
» uh, Hello again from west of Thailand
17/3/2024, 14:54 by Makarofu